Monday, March 1, 2010

INDIAN ANCIENT CURRENCY NOTES

Ancient Indian Currency Notes With History:


I was surprised when this landed in my e-mail. An excellent collection of 20 odd pictures of old Indian currency. The star is the 10,000 rupee note!

This email claims that the first set of British India notes were the ‘Victoria Portrait’ Series issued in denominations of 10, 20, 50, 100, 1000. These were unifaced, carried two language panels and were printed on hand-moulded paper manufactured at the Laverstock Paper Mills (Portals). The security features incorporated the watermark (GOVERNMENT OF INDIA, RUPEES, two signatures and wavy lines), the printed signature and the registration of the notes.

Rupees Ten

Rupees Hundered

British India Notes facilitated inter-spatial transfer of funds. As a security precaution, notes were cut in half. One set was sent by post. On confirmation of receipt, the other half was despatched by post.

Half note

This series remained largely unchanged till the introduction of the ‘King’s Portrait’ series which commenced in 1923.

Green Underprint – Rupees Five Hundred

Green Underprint – Rupees Five

Red Underprint – Rupees Fifty

Small Denomination Notes

The introduction of small denomination notes in India was essentially in the realm of the exigent. Compulsions of the first World War led to the introduction of paper currency of small denominations. Rupee One was introduced on 30th November, 1917 followed by the exotic Rupees Two and Annas Eight. The issuance of these notes was discontinued on 1st January, 1926 on cost benefit considerations. These notes first carried the portrait of King George V and were the precursors of the ‘King’s Portrait’ Series which were to follow.

Rupee One – Obverse

Rupee One -Reverse

Rupees Two and Annas Eight – Obverse

King’s Portrait Series

Regular issues of this Series carrying the portrait of George V were introduced in May, 1923 on a Ten Rupee Note. The King’s Portrait Motif continued as an integral feature of all Paper Money issues of British India. Government of India continued to issue currency notes till 1935 when the Reserve Bank of India took over the functions of the Controller of Currency. These notes were issued in denominations of Rs 5, 10, 50, 100, 500, 1000, 10,000.

Rupees Fifty

Rupees One Thousand

Rupees Ten Thousand

The Bank’s issues to January 1938 when the first Five Rupee note was issued bearing the portrait of George VI.

Rupees Five – First Note issued by Reserve Bank of India

This was followed by Rs 10 in February, Rs 100 in March and Rs 1,000 and Rs 10,000 in June 1938.

Rupees One Hundred

Rupees One Thousand

Rupees Ten Thousand

In August 1940, the one-rupee note was reintroduced, once again as a war time measure, as a Government note with the status of a rupee coin,

Rupee One Obverse

Rupee One Reverse

Rupees Two

As an added security feature, the security thread was introduced for the first time in India.

George VI Profile

George VI Frontal

The George VI series continued till 1947 and thereafter as a frozen series till 1950 when post independence notes were issued.


INDIAN COINS PRESENT AND PAST

INDIAN COINS PRESENT AND PAST WITH HISTORY:

Republic India Coinage

India won its independence on 15th August, 1947. During the period of transition India retained the monetary system and the currency and coinage of the earlier period. While Pakistan introduced a new series of coins in 1948 and notes in 1949, India brought out its distinctive coins on 15th August, 1950.

Chronologically, the main considerations influencing the coinage policy of Republic India over time have been:

  • The incorporation of symbols of sovereignty and indigenous motifs on independence;
  • Coinage Reforms with the introduction of the metric system;
  • The need felt from time to time to obviate the possibility of the metallic value of coins rising beyond the face value;
  • The cost-benefit of coinisation of currency notes

Independent India Issues could broadly be categorised as The Rupees from 1947-1950. This represented the currency arrangements during the transition period upto the establishment of the Indian Republic. The Monetary System remained unchanged at One Rupee consisting of 192 pies.

1 Rupee = 16 Annas

1 Anna = 4 Pice

1 Pice = 3 Pies

The Anna Series

This series was introduced on 15th August, 1950 and represented the first coinage of Republic India. The King's Portrait was replaced by the Lion Capital of the Ashoka Pillar. A corn sheaf replaced the Tiger on the one Rupee coin. In some ways this symbolised a shift in focus to progress and prosperity. Indian motifs were incorporated on other coins. The monetary system was largely retained unchanged with one Rupee consisting of 16 Annas.

DenominationMetalObverseReverse
Rupee OneNickel
Other Distributions

Other Distributions
Half RupeeNickel
Other Distributions

Other Distributions
Quarter RupeeNickel
Other Distributions

Other Distributions
Two AnnaCupro-Nickel
See Other Distributions

See Other Distributions
One AnnaCupro-Nickel
See Other Distributions

See Other Distributions
Half AnnaCupro-Nickel
See Other Distributions

See Other Distributions
One PiceBronze
See Other Distributions

See Other Distributions
The Decimal Series

The move towards decimalisation was afoot for over a century. However, it was in September, 1955 that the Indian Coinage Act was amended for the country to adopt a metric system for coinage. The Act came into force with effect from 1st April, 1957. The rupee remained unchanged in value and nomenclature. It, however, was now divided into 100 'Paisa' instead of 16 Annas or 64 Pice. For public recognition, the new decimal Paisa was termed 'Naya Paisa' till 1st June, 1964 when the term 'Naya' was dropped.

Naya Paisa Series 1957-1964

DenominationMetal / Weight / Shape / SizeCoin
Rupee OneNickel
10 gms
Circular
28 mm

Other Distributions
Fifty Naye PaiseNickel
5 gms
Circular
24 mm

Other Distributions
Twenty Five Naye PaiseNickel
2.5 gms
Circular
19 mm

Other Distributions
Ten Naye PaiseCupro-Nickel
5 gms
Eight Scalloped
23 mm (across scallops)

Other Distributions
Five Naye PaiseCupro-Nickel
4 gms
Square
22 mm (across corners)

See Other Distributions
Two Naye PaiseCupro-Nickel
3 gms
Eight Scalloped
18 mm (across scallops)

See Other Distributions
One Naya PaisaBronze
1.5 gms
Circular
16 mm

See Other Distributions

With commodity prices rising in the sixties, small denomination coins which were made of bronze, nickel- brass, cupro-nickel, and Aluminium-Bronze were gradually minted in Aluminium. This change commenced with the introduction of the new hexagonal 3 paise coin. A twenty paise coin was introduced in 1968 but did not gain much popularity.

Aluminium Series 1964 onwards

DenominationMetal / Weight / Shape / SizeCoin
One PaisaAluminium-Magnesium
0.75 gms
Square
17 mm (Daigonal)

See Other Distributions
Two PaiseAluminium-Magnesium
1 gm
Scalloped
20 mm (across scallops)

See Other Distributions
Three PaiseAluminium-Magnesium
1.25 gms
Hexagonal
21 mm (Diagonal)

See Other Distributions
Five PaiseAluminium-Magnesium
1.5 gms
Square
22 mm (Diagonal)

Other Distributions
Ten PaiseAluminium-Magnesium
2.3 gms
Scalloped
26 mm (across scallops)

Other Distributions
Twenty PaiseAluminium-Magnesium
2.2 gms
Hexagonal
26 mm (diagonal)
24.5 mm (across flats)

See Other Distributions

Over a period of time, cost benefit considerations led to the gradual discontinuance of 1, 2 and 3 paise coins in the seventies; Stainless steel coinage of 10, 25 and 50 paise, was introduced in 1988 and of one rupee in 1992. The very considerable costs of managing note issues of Re 1, Rs 2, and Rs 5 led to the gradual coinisation of these denominations in the 1990s.

Contemporary Coins

DenominationMetalWeightDiameterShape

See Other Distributions
Silver- gms23 mmCircular

See Other Distributions
Silver- gms23 mmCircular

See Other Distributions
Silver- gms23 mmCircular

See Other Distributions
Silver- gms23 mmCircular

See Other Distributions
Cupro-Nickel and Silver- gms23 mmCircular

See Other Distributions
Cupro-Nickel9.00 gms23 mmCircular

Other Distributions
Cupro-Nickel6.00 gms26 mmEleven Sided


Other Distributions

Ferratic Stainless Steel4.85 gms25 mmCircular

Other Distributions
Ferratic Stainless Steel3.79 gms22 mmCircular

Other Distributions
Ferratic Stainless Steel2.83 gms19 mmCircular


See Other Distributions

Ferratic Stainless Steel2.00 gms16 mmCircular